General
=======
24 Aug 2006, v9194
  Support for FreeBSD 6.0 has been added.
  Please use firmware v9194 provided on the web site instead of v9114 from the CDROM 01/06

10 Apr 2006, v9117
  Support for Openserver 6.0 and Unixware 7.1.4 has been added.
  Please use firmware v9117 provided on the web site instead of v9114 from the CDROM.

03 Mar 2006, v8832
  General updates on tools, drivers and documentation


Firmware
========
24 Aug 2006, v9194
  Please note information regarding metadata format change as noted below

10 Apr 2006, v9117
  Please note information regarding metadata format change as noted below

03 Mar 2006, v8832
  Performance optimization, metadata format change

  Attention:
  Starting with v8832 the metadata format of initialized hard disks has been changed.
  I.e. the available disk space on an initialized disk will be lower than on the same
  disk type initialized with firmware v7372 or v7377! 

  If a disk initalized with firmware v7372 or v7377 has to be replaced after the
  controller's firmware has been updated to v8832, v9117 or newer, either a disk 
  with higher capacity (at least +100MB) is required or the new disk must be
  initialized first on a controller which has firmware v7372 or v7377 installed.

  Also, after an array has been deleted and the disks have been reinitialized,
  it is strongly recommended to reboot a system prior to create a new array on these disks. 

30 Aug 2005, v7377
  Solves configuration issues on mainboards with Intel 7520 chipset, e.g. controller not being
  recognized at system startup. Web page now provides firmware revision 7377, which replaces 
  inital firmware revision 7372 from ICP CD 3.0.
  

Windows 2000,XP, 2003 driver 
============================
23 Mai 2005, v7372
  Microsoft certification *.cat files for 32-bit and 64-Bit Windows drivers rev. 4.2.1 added 
  (Zip file contains both drivers, for installation copy complete content onto one floppy disk).